Description

GM SB COMPATIBLE 350 C.I. ENGINE – 341 HP – BASE DRESSED – FUEL INJECTED

HP & Torque: 341 HP / 371 FT. LBS

Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads

Compression Ratio: 9:1

Camshaft: Hydraulic Roller Cam – .477 Intake / .471 Exhaust Lift and 202 Intake / 212 Exhaust Duration @ .050 – 115° LSA

Pistons: Hypereutectic

Crankshaft: Steel Crank – 3.480″ Stroke and 5.700″ Rods

DESCRIPTION: 

• HP & Torque: 341 HP / 371 FT LBS
• Compression Ratio: 9:1
• Aluminum Heads
• Hydraulic Roller Cam
• Cast Steel Crankshaft
• Hypereutectic Pistons

BLOCK:

• NEW BluePrint Cast Iron Block
• Manufactured and Machined in the USA!
• 4-Bolt Main
• 4.000″ Bore
• 1-Piece Rear Main Seal
• Mech fuel pump provision: Yes
• Passenger Side Dipstick
• Drilled and tapped for clutch linkage

ROTATING ASSEMBLY:

• Steel Crankshaft
• 3.480″ Stroke
• Forged 5.700″ connecting rods
• Hypereutectic pistons
• Internal Front/ External Rear engine balance

CYLINDER HEADS:

• BluePrint Aluminum Cylinder Heads – H8002K
• 64cc chamber
• 2.02″ intake/1.60″ exhaust valves
• 195cc intake/75cc exhaust runners

CAM SPECS:

• Cam Type: Roller
• .477 Intake .471 Exhaust
• 202 Intake / 212 Exhaust duration
• @ .050 – 115-degree lobe separation

IGNITION TIMING:

• 32 Degrees Total at 3500 RPM

ALSO INCLUDES:

• Valve covers
• Oil pan
• Timing cover
• Aluminum intake
• HEI distributor
• EFI system

NOTES:

• This engine is an excellent cruiser and daily driver engine.  This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
• The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.

Product :

Norris Marshall founded BluePrint Engines more than twenty years ago by building engines for local racers out of his garage. Since then, BluePrint Engines has grown to be one of the largest crate engine manufacturers in the world. Watch as Norris explains what makes BluePrint Engines different.

ONE HIGH-PERFORMANCE CRATE ENGINE AT A TIME

BluePrint Engines ® was started 20 years ago in a small garage in central Nebraska. What started as a passion for speed turned into a hobby, then a job, and finally a career.

Our founder, Norris Marshall, built one engine at a time for his friends and neighbors, and bit by bit his business and reputation grew. Drag racers, circle track racers, and street rodders all got some of the first engines produced by BluePrint Engines.

Most of us can relate to what happened next. Every day cars, or “grocery-getters,” were easier to sell to a LOT more people as babies, mortgages, and a need for financial security changed the way people shop.

This shift pushed Norris into the mainstream and his success in that endeavor is legendary.

Today, BluePrint Engines has produced more than 200,000 engines for cars and light trucks. We have a tremendous staff of qualified technicians who have a passion for performance—on the job and on the street.

HIGH-PERFORMANCE CRATE ENGINE EXPERIENCE

BluePrint means fun reliable horsepower that you can drive every day.

Our experience means that BluePrint is the best choice for your crate engine. But more importantly—you want to get that horsepower from a solid, reputable company that does the job right and stands behind it.

During our history, we have continued to build high-performance crate engines, and have always tried to give the buyer exactly what they wanted. That’s another hallmark of BluePrint Engines – we build engines for all needs and budgets.

If you’ve been shopping, keep in mind that most crate engines DON’T come as complete as the premium engines on our site. Only OUR premium crate engines come complete with fuel system, ignition system, plugs, wires, and the water and fuel pumps. Also, know that you can opt for either forged or cast components on most models.

Most of our buyers are spending a lot of time on their car. Spend a little more time looking for an engine, and you’ll see the BluePrint difference!